Everpure Model 202-P big bowl drop-in system. The parallel filter treatment unit can be set up as either a high capacity, dirt/sediment removal system or a high-volume, chlorine/taste/odor reduction system. Two, complete systems, installed in series, would accomplish both. Note: The 202P System does not provide full protection from chemical and lead contamination. The manufacturer recommends the installation of a consumer point-of-use system such as an Everpure H300 or H1200. SPECIFICATIONS Dimensions: 26-1/8” H 23-1/4” W 8.5”D Note: a clearance of 2-1/2” underneath system is required for cartridge change. Mounting Bracket: Holes drilled at 16” on center Inlet connection: 3/4” internal pipe thread (FPT) Service flow rate: Maximum 10 gpm Pressure: Minimum 5 psi Maximum 90 psi (non-shock) Maximum temperature: 100°F (38°C) cold water use only No electrical connection required Operating weight: 41.5 lbs.